Erasing the firmware of a Quatropus accessory is similar to programming it, but an erased accessory will no longer function. So this operation is intended solely for use in troubleshooting (in conjunction with MaxMon support). However, erasing will not remove the Quatropus bootloader so you should always be able to reprogram the accessory.

Before pressing "Continue" ensure that the Quatropus is connected to your phone and powered up, then follow the on-screen instructions. There is only one progress indicator:

  • Erasing: if erasing does not complete within a minute, or you see messages about bootloader timeouts, try disconnecting and reconnecting power to the Quatropus.