• Bundles: complete 2- or 4-transducer systems
  • Components: phones, Quatropuses and transducers (sensors and actuators)
  • Accessories: remote control power sockets, adapters, cables and stickers
  • Upgrades: component upgrades

Bundles

£385.00 each

Quatropus-T4

Buy a complete 4 x transducer MaxMon system that meets all your remote monitoring and control needs and saves you money compared to buying components separately.

See Technical specifications for more information about Quatropus-T4 components.

£335.00 each

Quatropus-T2

Buy a complete 2 x transducer MaxMon system that meets your remote monitoring and control requirements and saves you money compared to buying components separately.

See Technical specifications for more information about Quatropus-T2 components.

Components

£125.00 each

Dual-camera Android phone

Mid-range Android phone: future-proof your MaxMon system with front and rear camera (5MP), LED flash and lots of storage.

Pre-configured with the MaxMon app (and special auto-REBOOT and auto-ON reliability options). If you buy a Quatropus in the same order we'll configure the app to work with it too! Unlocked to work on any GSM mobile network (requires SIM).

NOTE: A-grade refurbished and tested phone.

More information...

£95.00 each

Basic Android phone

Entry-level Android phone: ideal for MaxMon, but 2MP rear-only camera, no LED flash and limited storage.

Pre-configured with the MaxMon app (and special auto-REBOOT and auto-ON reliability options). If you buy a Quatropus in the same order we'll configure the app to work with it too! Unlocked to work on any GSM mobile network (requires SIM).

NOTE: New or A-grade refurbished and tested phone.

More information...

£120.00 each

Quatropus2

Bluetooth-enabled Quatropus: Interfaces up to four transducers (sensors or actuators) to an Android phone running the MaxMon app. Supports more modern phones (Android 2.2 onwards) and the MaxMon app can connect to more than one Quatropus2.

Need more transducers? Add another Quatropus2.

Technical specifications

£50.00 each

Sensor-TRH (temp, humid)

Monitor temperature and relative humidity at your remote property and guard against costly damage caused by extremes of temperature, condensation, mildew, etc. Use in conjunction with MaxMon actuators to remotely monitor and control heaters or dehumidifiers.

Technical specifications

 

£50.00 each

Sensor-M (motion)

Detect motion (or the absence of motion) at your remote property. This high quality passive infra-red sensor works in the dark and is mainly used to detect intruders, but can also be used to monitor the activity of vulnerable relatives living alone.

Technical specifications

£60.00 each

Sensor-C2 (float, proximity)

Two-port contact sensor. Comes with a float sensor (suitable for monitoring liquid levels in bilges or basements), a proximity sensor (suitable for monitoring whether a door, window or hatch is open or closed) and two 3m extension cables.

Technical specifications

£50.00 each

Sensor-V2 (volts, 30VDC)

Two-channel DC voltmeter. Originally designed for monitoring marine 12V and 24V lead acid battery systems the Sensor-V2 can monitor any 12V or 24V DC circuits, e.g. remote pump activity.

Technical specifications

£60.00 each

Sensor-B (battery/failover)

A lot of functionality in a small package! Connect a Sensor-B between a 12V or 24V battery system and your MaxMon system and obtain automatic failover to battery during mains power cuts. And at the same time monitor battery voltage and mains power.

Technical specifications

£60.00 each

Sensor-S (power consumption)

Clip a Sensor-S around ONE of the main current-carrying cables entering your property (typically at the electricity meter) to remotely monitor cumulative or instantaneous power consumption. Great for detecting excessive power consumption or unauthorised occupancy without invading tenants' privacy.

Technical specifications

£50.00 each

Actuator-RF (r/c sockets)

Radio control actuator that emulates the remote controls of popular radio-controlled power sockets (which must be purchased separately). Enables you to switch mains-powered electrical devices on or off at your remote property, e.g. lights, heaters or dehumidifiers.

Technical specifications

£50.00 each

Actuator-R2 (relays, 5A, 30VDC)

Dual relays enable you to switch up to two 12V or 24V battery-powered devices on or off at your remote property. Designed for boats and mobile homes but can control any 0-30VDC 0-5A circuits.

Technical specifications

Accessories

£25.00 each

Mercury 10A r/c sockets (pack of 3)

Use with our Actuator-RF to control mains-powered devices at your remote property (for example switching lights on and off to simulate occupancy, heaters, dehumidifiers, battery chargers, etc.).

Purchase these sockets with a Quatropus bundle that includes an Actuator-RF and a pre-configured phone and we'll pre-configure the MaxMon app and sockets to work together!

£40.00 each

Energenie 13A r/c sockets (pack of 4)

Use with our Actuator-RF to control mains-powered devices at your remote property (for example switching lights on and off to simulate occupancy, heaters, dehumidifiers, battery chargers, etc.).

Purchase these sockets with a Quatropus bundle that includes an Actuator-RF and a pre-configured phone and we'll pre-configure the MaxMon app and sockets to work together!

£35.00 each

Energenie 13A r/c extension lead

Use with our Actuator-RF to control mains-powered devices at your remote property (for example switching lights on and off to simulate occupancy, heaters, dehumidifiers, battery chargers, etc.).

Purchase with a Quatropus bundle that includes an Actuator-RF and a pre-configured phone and we'll pre-configure the MaxMon app and the r/c extension lead to work together!

£30.00 each

Brennenstuhl 1000W r/c sockets (pack of 3)

Use with our Actuator-RF to control mains-powered devices at your remote property (for example switching lights on and off to simulate occupancy, heaters, dehumidifiers, battery chargers, etc.).

Purchase these sockets with a Quatropus bundle that includes an Actuator-RF and a pre-configured phone and we'll pre-configure the MaxMon app and sockets to work together!

£20.00 each

AC current monitor for Sensor-V2

Clip this tiny transformer around a cable carrying mains AC current up to 25A and it outputs a DC voltage in the range 0-5 VDC, proportional to the AC current. Wire it to a Sensor-V2 to monitor activity of mains-powered pumps, heaters, dehumidifiers, etc.

See Q: How do I monitor electrical power consumption? for how to safely install and use clip-on current transformers.

£22.50 each

10m extension cable for Sensor-C2

10m extension cable for the Sensor-C2. Extend float or door/window sensors to bilges, basements, doors, hatches or windows.

£12.50 each

5m extension cable for Sensor-C2

5m extension cable for the Sensor-C2. Extend float or door/window sensors to bilges, basements, doors, hatches or windows.

£30.00 each

20m alarm loop for Sensor-C2

Sensor-C2 pigtail adapter plus 20m 'audio' cable for use as an alarm loop/tether for outdoor equipment. Sensor-C2 not included.

See Q: How do I use a Sensor-C2 alarm loop?

£20.00 each

10m alarm loop for Sensor-C2

Sensor-C2 pigtail adapter plus 10m 'audio' cable for use as an alarm loop/tether for outdoor equipment. Sensor-C2 not included.

See Q: How do I use a Sensor-C2 alarm loop?

£15.00 each

20m 'audio' cable for Sensor-S

Used to connect a Sensor-S to an outdoor electricity meter, or with a Sensor-C2 as an alarm loop/tether for external equipment.

£10.00 each

10m 'audio' cable for Sensor-S

Used to connect a Sensor-S to an outdoor electricity meter, or with a Sensor-C2 as an alarm loop/tether for external equipment.

£10.00 each

MaxMon window stickers (pack of 2)

Two 15x15 cm (approx. 6x6 in) window stickers that adhere to the INSIDE of windows at your remote property to deter intruders.

Click here to download a FREE printable version.

£15.00 each

MaxMon window stickers (pack of 4)

Four 15x15 cm (approx. 6x6 in) window stickers that adhere to the INSIDE of windows at your remote property to deter intruders.

Click here to download a FREE printable version.

Upgrades

£50.00 each

Quatropus1 upgrade

The original Quatropus1 is no longer for sale and has been superseded by the Quatropus2. The bluetooth-enabled Quatropus2 has several advantages: support for more modern Android phones, more flexible component placement (up to 5m between phone and Quatropus2) and the ability to add more transducers by 'pairing' your phone with multiple Quatropus2 modules.

If you own a Quatropus1 and would like to upgrade it to a Quatropus2: buy this upgrade, post us your Quatropus1 (we'll email you our address) and we'll upgrade it and post it back to you.